32 comments

• Comment Link Sunday, 10 February 2013 18:43 posted by Alex

  That was the first thing I did. And I reinstalled the program. And yet, only my PC and the modem are displayed. would be nice if you give me a solution to the problem via email. thanks, Alex
• Comment Link Sunday, 10 February 2013 00:05 posted by Administrator

  Alex,
  
  Try refresh button first. if still not beable to detect new IP address, close netcut and restart it
• Comment Link Thursday, 07 February 2013 13:29 posted by Alex

  I have the same problem as "weirdo". Netcut find only my PC and the modem. Other devices are not displayed. In addition, the program crashes. Please help
• Comment Link Thursday, 07 February 2013 09:32 posted by weirdo

  I using my laptop to run the netcut program...
  After that, I using my smartphone(running in android OS) to connect the same network to access internet...
  I using wireless modem and of course my smartphone connect by wireless as well...
  But on the netcut, it only show my pc information and the modem information...
  The smartphone details are not shown up on the netcut program...
  May I know the actual way to view all the devices connected to the network?
• Comment Link Saturday, 12 January 2013 08:45 posted by luan

  very very good. thank admin
  (y)
• Comment Link Monday, 12 November 2012 01:03 posted by Yanagi

  sir, i think there is something wrong in the program, i keep getting an error message saying "the procedure entry point PacketGetVersion could not be located in the dynamic link library packet.dll."
  I have tried everything I know and I am very good with computers. can you please help?
• Comment Link Wednesday, 07 November 2012 03:55 posted by Rizal

  can't uninstall netcut old version... please help me sir :)
• Comment Link Wednesday, 12 September 2012 18:01 posted by ahmed

  thaks
• Comment Link Friday, 17 August 2012 19:58 posted by Dizgo

  I only find myself in the list although there is 2 other pcs on the wifi. Does it works on Windows 7?
• Comment Link Tuesday, 17 July 2012 11:26 posted by putu raya

  netcut not run on Windows 8
• Comment Link Friday, 25 May 2012 08:32 posted by aditioariopamungkas

  salam
  sy ingin bertanya setelah menggunakan cut n sy cut org2 yg menggunakan jaringan yg sm lalu sy mau meng aktifkan lg org yg sy cut bgm cr nya mohon arahan nya trmkash?
• Comment Link Saturday, 19 May 2012 20:12 posted by ninja777

  I have problem with netcut. First when installed program work fine, until system reboot. After that program "eats" to much memory. Memory consumption goes almost to 1.3 GB and program not even doing his job, i.e. not finding any computers on network, only mine and gateway. Operating system Windows xp sp3. After reinstalling operating system, same situation.
• Comment Link Saturday, 19 May 2012 20:12 posted by ninja777

  I have problem with netcut. First when installed program work fine, until system reboot. After that program "eats" to much memory. Memory consumption goes almost to 1.3 GB and program not even doing his job, i.e. not finding any computers on network, only mine and gateway. Operating system Windows xp sp3. After reinstalling operating system, same situation.
• Comment Link Saturday, 19 May 2012 11:41 posted by balian

  hy im still newbie, how to use netcut 2.o..=)
• Comment Link Wednesday, 25 April 2012 13:05 posted by Sander Dale Bjørenvik

  Hello Administrator,
  
  I have tried the Task Manager, but it happens over and over again.
  
  Do it takes a long time before you release a new version?
• Comment Link Tuesday, 24 April 2012 21:30 posted by Sander Dale Bjørenvik

  when i had install. do it works one time, but after it just drive in the backgound.
• Comment Link Tuesday, 13 March 2012 14:30 posted by Tommy Raudy

  any idea for windows 8 consumer preview?
• Comment Link Sunday, 26 February 2012 06:19 posted by Hema Vishnu Pola

  hey dude!! its not cutting off anyone... what to do??
• Comment Link Saturday, 07 January 2012 11:29 posted by syafiqul asyraf

  im still newbie, how to use netcut 2.o..=)
• Comment Link Monday, 07 November 2011 19:20 posted by m c

  how do i cut off someone from the network?
• Comment Link Sunday, 30 October 2011 10:19 posted by amir

  why when refresh kt net-cut in ip adderss not out list also.software this break down to? once wearing only to?.when refresh immediately gone ip address
• Comment Link Thursday, 22 September 2011 02:14 posted by Administrator

  Hello Dexter,
  Were you cutting someone at the time refresh net? Try to not exec any cut off, and refresh again?
  
  Thanks
  Admin
• Comment Link Wednesday, 21 September 2011 14:38 posted by Dexter A. Sison

  Greetings! Every time I press refresh net in my net cut the program suddenly closes.
• Comment Link Thursday, 15 September 2011 11:17 posted by Administrator

  hello rayfa,
  It is possible one MAC address with more than one IP binding.
• Comment Link Tuesday, 13 September 2011 15:54 posted by rayfa

  i found double ip adress in netcut ex. 10.34.21.7|10.34.21.6 with single MAC ADDRESS
• Comment Link Saturday, 03 September 2011 09:49 posted by babing

  i think netcut is great tool
  i like this
  
  can add feature shortcuts like a keylogger
  example
  
  ctrl + n
  also hidden tray icon, can be more invisible
  
  i hope netcut can more useful
• Comment Link Monday, 08 August 2011 09:00 posted by hazemsaiegh

  i'm so sorry, but it is now working fine without annything i've made to it,may br i need to reopen it as you said, thank you and i will inform you if anything wrong may occur in this beautiful program
• Comment Link Monday, 08 August 2011 03:11 posted by Administrator

  Jassim,
  
  I think you may need manually select the right gateway IP inside netcut. if you notice there are button >> and nks
• Comment Link Monday, 08 August 2011 03:08 posted by Administrator

  hello hazemsaiegh,
  Thanks for letting me know this, can you give me output of following
  
  1. ipconfig /all
  2. which adapter are you running netcut against at the time it hang?
  
  also, can you try If you close netcut and reopen, does it hang?
  
  
  Thanks
• Comment Link Sunday, 07 August 2011 19:30 posted by Jassim

  It's slightly glitchy with Windows 7 64 bit, also once I installed my new Thompson TG585 v8 router, neither 1.1 nor 1.4 would actually cut people off. It also had 2 router IP addresses, 192.168.1.254 (what you use to login and the routers and also 192.168.1.253 which I have no idea what it does but netcut shows it active but my router see's no device with that IP). HELP!
• Comment Link Sunday, 07 August 2011 07:14 posted by hazemsaiegh

  it hangs when pressing refresh net on my win7 64bit and windows prompt to close it !
• Comment Link Sunday, 07 August 2011 04:17 posted by hazemsaiegh

  fantastic but where is netcut defender 2.1.4 links